Daisy Girl PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Peace & Daisies by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Caron Vinson. You can find it here. Please do not use without the proper license!

Mask of Choice: I used  Vix_BigMask019. You can find it here.

 Font of Choice: I used I used Xiomara. You can find it here.

 

Let's get started!

 

New canvas 600X600
(C/P all elements as new layers)
ele60- resize 65%
select inside with magic wand
expand by 5
C/P paper of choice (I used p14) under frame layer
invert selection & delete
C/P close up of tube under frame layer
position & delete
deselect
change blend mode & opacity
C/P tube- resize if needed
place on left side of frame
ele46- resize 65%
duplicate & mirror
merge down
duplicate a few times & arrange
ele70- resize 35%
ele20- resize 35%& mirror
ele45- resize 30%
ele02- resize 35% & free rotate right 15
ele21- resize 65% & mirror
duplicate & mirror

Add DS

C/P paper of choice (I used p09)
apply mask & merge
resize 90%

 

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Wonderland PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Wonderland by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Suzanne Woolcott. She is no longer selling so just use whatever you have. Please do not use without the proper license!

 Font of Choice: I used I used Alice in Wondrland. You can find it here.

 

Let's get started!

 

 New canvas 600X600
C/P ele80
Resize 60%
Select inside with magic wand
Expand by 3
C/P paper of choice below frame layer (I used p18)
Invert selection, delete & deselect
C/P tube
Resize if needed
Duplicate; on duplicate Gaussian Blur 3 & change blend mode to Soft Light
DS original tube
Place at bottom left of frame

C/P elements of choice
I used the following:
ele56-arrange, duplicate & mirror; merge together
ele50
ele116- resize 25%
ele123- resize 45%
ele01- resize 65%; duplicate & mirror
ele104- resize 35%
ele130- resize 35%
ele63- resize 30%
ele25- resize 75%

Add DS where desired

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Love is Red PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used  by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used Snow Angel by Verymany. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used WSL_Mask84 here.

 Font of Choice: I used I used Saginaw. You can find it here.

 

Let's get started!

 

New canvas 600X600
C/P ele51 Resize 60%
Select inside with magic wand
Expand by 3
C/P paper of choice (I used p09)
Invert selection, delete & deselect
C/P tube
Resize if needed
I also mirrored mine
C/P closeup under frame
Resize if needed
Erase any parts outside of frame
Change blend mode & opacity

C/P elements of choice
I used the following:
ele18- duplicated a few times & arranged
ele09- resize 35%
ele05- resize 25%
ele50- resize 35% & duplicate
ele37- resize 35%
ele20- resize 25%
ele02- resize 20%

Add DS

C/P paper of choice (I used p13)
Apply mask & merge group
Use Raster Deform tool to adjust
 

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Winter Angel PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Winter Angel by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used Snow Angel by Verymany. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used Vix_Mask8Christmas2010 here.

 Font of Choice: I used I used Xiomara. You can find it here.

 

Let's get started!

 

 New canvas 600X600
C/P frame2 as a new layer
Resize 75%
Select inside frame with magic wand
Expand by 5
C/P paper of choice as a new layer under frame
(I used p09 resized 45%)
Invert selection & delete
Deselect
C/P tube
Resize if needed
C/P closeup of tube behind frame
Resize if needed
Erase any parts showing outside of frame
Change blend mode to Luminance(L) & opacity to 65%

C/P elements of choice
I used the following:
angels- resize 45%
flower6- resize 45%
flower2- resize 45%
flower1- resize 45% & duplicate
berries- resize 65%, duplicate & mirror
snowflake1- resize 32% & duplicate 2x
snowflake3- resize 30%; duplicate & resize 75%

 

Add DS

C/P paper of choice
(I used p13)
Apply mask & merge group
Resize 90%
Add noise

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Party Girl PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used 3,2,1...Happy New Year by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used an exclusive tube from Pics for Design. You can  find it here. Please do not use without the proper license!

 Font of Choice: I used I used Xiomara. You can find it here.

   

Let's get started!

 

New canvas 600X600
C/P ele31 Resize 65%
Select inside each frame Expand by 3 & C/P papers of choice behind frames
(I used p04, p05, p10 & p11)
C/P your tube inside each frame Resize if needed
Erase any parts showing outside of frame
Change the blend mode & opacity on each tube
C/P tube to left of frame Resize if needed

C/P elements of choice
I used the following:
ele10- free rotate right 90, duplicate & flip
ele24- resize 45%
ele56- resize 45%
ele46- resize 45%
ele58- resize 45%
ele12- duplicate & flip

Add DS

 

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Pretty in Pink PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Sweet Natalie by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by PinUpToons. You can  find it here. Please do not use without the proper license!

 Font of Choice: I used I used A Gentle Touch. You can find it here.

Mask of Choice: I used WSL_Mask82 here. 

Let's get started!

New canvas 600X600
C/P ele59 Resize 60%
Select inside with magic wand Expand by 3
C/P paper of choice (I used p09)
Invert selection, delete & deselect
C/P tube resize if needed
C/P closeup of tube below frame
Erase any part showing outside of frame and change blend mode to Luminence

(Legacy) & opacity to 55
DS tubes & frame

C/P elements of choice
I used the following:
ele24- resize 35% & mirror
ele04- resize 45%
ele15- resize 20%
ele22- resize 65%, duplicate & mirror
ele77- resize 35%
ele40- resize 45%, duplicate a few times & arrange

DS elements

C/P paper of choice (I used p02)
Apply mask & merge group
Add noise

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Bountiful Thanksgiving PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Gooble Gobble by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Anna Liwanag. You can  find it here. Please do not use without the proper license!

 Font of Choice: I used I used Xiomara. You can find it here.

 

Let's get started!

 

 New canvas 600X600
C/P ele46 Resize 65%
Select inside each square with your magic wand
Expand by 1
C/P paper of choice (I used p12)
C/P closeup Resize if needed
DS closeup
Invert selection & delete on both paper & closeup layers
Deselect
Change blend mode on closeup to Lumiance(Legacy) & lower opacity
C/P tube Resize if needed
DS frame & tube

C/P elements of choice
I used the following:
ele05- resize 25%
ele08- resize 25%
ele30- resize 35%
ele26- resize 25%
ele25- resize 25%
ele29- resize 20%
ele16- resize 45%; free rotate right 90
ele17- resize 40%; free rotate right 65
ele49- resize 75%; Duplicate & resize 75%; Duplicate a few times & arrange; merge all of these together & move to bottom; lower opacity to 70

 

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

 

Sleepy Time PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Sweet Dreams by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by PinUpToons. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used gemsmask8 here.

 Font of Choice: I used DK Sleepy Time. You can get it here.

Plugin: Mura's Meister Cloud. This is a free filter. Do a Google search to find it.

  Rug by me (Right click and save) 

 

Let's get started!

 

New canvas 600X600
C/P ele02 Resize 65% & move up
Use selection tool set to rectangle & select inside window
Add new layer below window & apply MuRa's Meister Cloud
Forground #c0c0c0 Background #1d1d27
C/P ele20
Invert selection & delete
Deselect
C/P ele06 Resize 65%
C/P tube
Resize if needed

C/P elements of choice
I used the following:
ele78- resize 45%
ele04- resize 65%
ele35- resize 25%
ele32- resize 25%
ele79- resize 35%
rug

DS elements & tube

C/P paper of choice & move to bottom ( I used p13)
Apply mask & merge group
Resize 85%

Crop & resize
Add name & copyright
Save as .png and you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Gorjuss Autumn PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used AutumnSong by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Suzanne Woolcott. She is no longer selling tubes, so just use what you have. Please do not use without the proper license!

Mask of Choice: I used WSL_Mask133 here.

  Font of Choice: I used Not His Angel. You can find it here.

 

Let's get started!

 

 New canvas 600X600
C/P ele21 Resize 65%
Select outside frame & expand by 5
C/P paper of choice (I used p01)
Delete & deselect
C/P ele26 Duplicate & arrange until you have created a ground
C/P tube Resize if needed
DS tube, frame & ground

Add elements of choice
I used the following:
ele43: resize 45%
ele80
ele79
ele19: resize 45%
ele50: resize 35%
ele07: resize 25%
ele23: resize 80%
ele60: resize 80%, duplicate & mirror
DS elements

C/P paper of choice (I used p02)
Apply mask & merge group
Resize 95%
I cut the bottom of my mask off because I didn't like how it looked.

 Crop & resize now

Add name & copyright

Save as a .png & you're done!

 

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com 

Perfectly Autumn PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Perfectly Autumn by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Alex Prihodko. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used WSL_Mask84 here.

  Font of Choice: I used Great Vibes. You can find it here.

 

Let's get started!

 

 New canvas 600X600
C/P ele23 Resize 70%
Add new layer below frame layer
Select all
C/P p05 into selection
Deselect
Apply mask & merge group
Resize 90%
Add Noise
C/P tube
Resize if needed
C/P tube again
Mirror & arrange inside frame
Delete any parts outside of frame
Change blend mode to Luminence(Legacy) & opacity to 45

Add elements of choice
I used the following:
ele75- resize 45%
ele49- resize 65%; Duplicate & Mirror; Duplicate again & move up; duplicate & mirror; erase parts showing inside frame
ele08- resize 45%; duplicate & arrange until you have "grass"
ele27- resize 45%
ele47- resize 35%
ele79- resize 35%
ele32- resize 20%; free rotate right 35

DS elements

 Crop & resize now

Add name & copyright

Save as a .png & you're done!

 

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com 

Autumn Day PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Autumn Harvest by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Pinuptoons. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used WSL_Mask84 here.

  Font of Choice: I used Too Much Paper! You can find it here.

 

Let's get started!

 

New canvas 600X600
C/P ele34 Resize 65%
Select outside frame with magic wand
Expand by 5
C/P p01 Resize 65% & position
Delete & deselect
Move paper layer under frame
C/P tube Resize if needed

C/P elements of choice
I used the following:
ele27- resize 45%; free rotate left 45; duplicate & arrange until you have a pile of leaves
ele69- resize 40%
ele59- resize 25%
ele12- resize 85%
ele26- resize 35%
ele40- resize 35%
ele28- resize 25%
ele62- resize 25%
ele15- resize 65%
ele16- resize 35%
ele67- resize 65%

DS elements

C/P paper of choice (I used p07)
Apply mask & merge group
Resize 95%

 Crop & resize now

Add name & copyright

Save as a .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com 

Princess PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Fairy Tale Princess by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Pinuptoons. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used WSL_Mask12 here.

  Font of Choice: I used Xiomara. You can find it here.

 

Let's get started!

 

 New canvas 600X600
C/P ele67 Resize 65%
Select inside frames with magic wand
Expand by 3
C/P paper of choice (I used p04)
Invert Selection & Delete
Deselect
C/P tube Resize if needed
DS tube & frame

C/P elements of choice
I used the following:
ele24- Resize 65%, Duplicate & Mirror; Merge together
ele10- Resize 35%
ele09- Resize 25%
ele74- Resize 30%
ele58- Resize 20%
ele66- Resize 70%
ele17- Resize 10%
ele28- Resize 25%
ele06- Resize 35% free rotate right 90
ele71- Resize 15%
DS elements

C/P paper of choice (I used p02)
Apply mask & merge
Resize 95%

 Crop & resize now

Add name & copyright

Save as a .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com 

Beach Party PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Beach Party by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Kaci McVay. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used WSL_Mask2 here.

Font of Choice: I used Beach Type here.

 

Let's get started!

 

New canvas 600X600
C/P ele16 Resize 70%
C/P paper of choice behind ele16
Resize if needed (I used p03 resized 70% & moved up.)
Use the selection tool (selection type: Rectangle; Mode: Add) to select the rectangles in ele16
On paper layer invert selection, delete & deselect

C/P ele44 Resize 70% Duplicate & Mirror
(I recolored mine using Manual Correction)

C/P tube Resize if needed
(I lightened mine using Brightness/Contrast)

C/P elements of choice
I used the following:
ele02- resize 45%
ele05- resize 35%
ele33- resize 65% & Mirror
ele40- resize 25%
ele57- resize 20%
ele06- resize 35%
ele43

Add DS to desired elements & tube

C/P paper of choice right above background layer
(I used p06)
Apply mask & merge group
I resized mine 90%

 

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Game On PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Grid Iron by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Ismael Rac. You can  find it here. Please do not use without the proper license!

Font of Choice: I used Jersey M54 here.

Grass by me (Click to make full size then right click to save.)

 

Let's get started!

New canvas 600X600
C/P ele35 Resize 60% & Mirror
Move to left
Select inside frame with magic wand & Expand by 3
C/P paper of choice (I used p03)
Invert selection & Delete
Deselect & move paper under frame
C/P closup tube & mirror
Erase any parts showing outside of frame
Change blend mode to Luminance(Legacy)
Lower opacity to 75%

C/P tube to left of frame
Resize if needed

Add elements of choice
I used the following:
ele09- resize 70%
ele50- resize 35%
ele07- resize 45%
ele30- resize 20%
ele15- resize 20%
ele14- resize 35%
ele46- resize 80%
ele39- resize 85%
grass by me

DS tube & elements

Crop & resize

Add name, words & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Spring Beauty FTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Spring in the Air by Sweet Addictionz Scraps. You can find it here.

 Tube of Choice: I used a tube by Gemini Creationz. You can buy it here. Please do not use without the proper copyright!

Mask of Choice: I used SKDS_CMFloral4. You can find it here. 

Font of Choice: I used Tabitha here.

 

Let's get started!

 

 New canvas 600X600
C/P the following elements:
SITA_Element43- Resize 75%
SITA_Element3- Duplicate, Mirror & Merge Down; Duplicate, Flip & Merge Down
SITA_Element1- Resize 35% & move to left of frame; Duplicate & Mirror; Move both below

frame
SITA_Element4- Resize 35%, Duplicate a few times & scatter around grass
SITA_Element35- Resize 15%, Free rotate Right 20, Duplicate, Mirror & Position
SITA_Element26- Resize 35%
DS elements

Select inside heart with magic wand
Expand by 25
Resize paper of choice to 600X600 (I used SITA_Paper4 recolored)
C/P below heart layer
Invert Selection & Delete
Deselect

C/P tube
Resize if needed
DS

C/P paper of choice (I used SITA_Paper9 recolored)
Apply mask
Resize 110%

 

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

 

Girly Girl PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used With Love Collab by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by PinUpToons. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used BellaLuna's MosaicMask. You can find it at Creative Misfits Creations here. 

Font of Choice: I used Miss Smarty Pants here.

 

Let's get started!

 

 New canvas 600X600
C/P ele36 Resize 65%
Select inside top left frame with magic wand
Expand by 3
Paste paper of choice
Invert Selection & Delete
Deselect
Repeat with other 2 frames
I used p01, p02 & p04
DS frame

C/P the closeup tube
Position in top left frame & erase any parts showing outside of that frame
Repeat for other 2 frames
DS tube layers
Change blend mode of tube layers to Luminance (Legacy)
Lower opacity to 65%

C/P tube
Resize if needed
DS

C/P any elements you want
I used the following:
ele12- resize 35%
ele28- resize 45% Duplicate & Mirror
ele05- resize 25% Free rotate Right 20
ele19- resize 30%
ele26- resize 20%
ele24- resize 20%
ele25- resize 25% Mirror
ele50- resize 90% Free rotate Right 90

DS all elements

C/P paper of choice (I used p10)
Apply mask & merge group
Resize 85%

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Freaky Tiki PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

Plugins: MuRa's Meister Cloud. I am not sure where to get this. It is a freeware plugin so just Google it :)

 Kit of Choice: I used Freaky Tiki by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Joel Adams. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used SST-Mask1 by me. You can find it here. 

Font of Choice: I used Life's a Beach here.

Sand by me (Click to make full size then right click & save.)

Let's get started!

New canvas 600X600
C/P ele19
Resize 65%
Select inside frame with magic wand
Expand by 5 MuRas Meister Cloud FG #c5def6 BG #ffffff Default Settings
Deselect
C/P tube
Resize if needed & move to right of frame
C/P sand
Move to bottom of frame

C/P elements of choice
I used the following:
ele28- resize 45% & move behind frame; erase any parts outside of frame
ele50- resize 65% & move behind grass
ele02- resize 40% & move behind grass
ele01- resize 45%
ele54- resize 75% & Mirror
ele61- resize 45%
ele17- resize 15%
ele63- resize 25%
ele66- resize 25%

Add DS where desired

Add new layer & apply MuRa's Meister Cloud FG #9bdbf5 BG #fbfdfe Default Settings
Apply mask & merge group
Use Raster Deform Tool to adjust
Duplicate & merge down

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Daisy Days PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Daisies and Daffies by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Alex Prihodko. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used SST- TDD Exclusive Flower Mask 2 by me. This is an exclusive mask for The Designer's Depot. You can find it here. 

Font of Choice: I used Mural Script here.

Let's get started!

New canvas 600X600
C/P ele31
Resize 65% Free Rotate Left 10
Select inside with magic wand
Expand by 5
C/P paper of choice (I used p05)

C/P elements of choice
I used the following:
ele29- move to left, duplicate & mirror
ele05- duplicate & merge down; move to left, duplicate & mirror; merge down, duplicate & move up
ele70- resize 65%
ele60- resize 65%
ele21- resize 65%
ele44- resize 35%, duplicate & mirror
ele32- resize 15% & duplicate a few times

C/P tube
Resize if needed

DS frame, elements & tube

C/P paper of choice (I used p04)
Apply mask & merge group
I used the Raster Deform tool to adjust mine

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

American Beauty PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used American Beauty by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Elias Chatzoudis. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used WSL84 here.

 Font of Choice: I used Papyrus. This font came with my computer.

My Grass (Click to make full size then rick click & save.)

Let's get started!

New canvas 600X600
C/P ele94
Resize 75%
C/P paper of choice (I used p12)
Use the Selection Tool to select inside your frame
Invert selection & Delete
Deselect
C/P tube
Resize if needed

C/P elements of choice
I used the following:
my grass
ele29
ele34- resize 75%
ele56- resize 45%
ele65- resize 35%
ele99- resize 25%
ele44- resize 45%, Duplicate & Mirror

DS frame, tube & elements

C/P paper of choice (I used p05)
Apply mask & merge
Resize 95%

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com

Raven PTU Tut

Supplies Needed:

PSP: I used PSP9, but any version should do.

 Kit of Choice: I used Raven by Scrappin Krazy Designs. You can find where to buy it here.

 Tube of Choice: I used a tube by Alex Prihodko. You can  find it here. Please do not use without the proper license!

Mask of Choice: I used WSL_Mask228 here.

 Font of Choice: I used Chopin Script. You can get it here.

Grass by me (Right click and save)

 

Let's get started!

New canvas 600X600
C/P frame4
Resize 65%
Select inside 1 frame with magic wand
Expand by 3
C/P paper of choice
Invert Selection & delete
Deselect
Repeat for other 2 frames (I used pp9, pp7 & pp3)

C/P closeup of tube in each frame
Position & erase any parts that show outside of frame
Change blend mode to whatever looks best (I used Luminance(Legacy))

C/P tube
Resize if needed

C/P elements of choice
I used the following:
ele11- resize 35%
tree- resize 65% & Mirror
rug(made by me)
bird- resize 45%
ele25- resize 25%
key- resize 25%
ele26- resize 25%
ele19- resize 25%
polish- resize 25%
ele2- resize 15% free rotate right 30

DS frame, tube & elements

C/P paper of choice (I used pp2)
Apply mask & merge group
Use raster deform tool to adjust
Lower opacity to 65%

Crop & resize

Add name & copyright

Save as .png & you're done!

I would love to see your results! If you would like to share just send them to me: sherenassweettreats@yahoo.com